Hold down button START/Pause for 5 seconds, until you hear a beep.Switch off the appliance by pressing the ON/OFF button.Switch on the appliance by pressing the ON/OFF button.
The factory sets the default value for the water hardness This information can be obtained from your local water supplier. To allow the water softener to work in a perfect way, it is essential that the water hardness setting is based on the actual water hardness in your house. Whenever you need to add salt, it is mandatory to complete the procedure before the beginning of the washing cycle to avoid corrosion. Make sure the cap is screwed on tightly, so that no detergent can get into the container during the wash program (this could damage the water softener beyond repair).
Remove the funnel and wipe any salt residue away from the opening. Position the funnel (see figure) and fill the salt reservoir right up to its edge (approximately 1 kg) it is not unusual for a little water to leak out. Only the first time you do this: fill the salt reservoir with water. Remove the lower rack and unscrew the reservoir cap (anticlockwise). The salt reservoir is located in the lower part of the dishwasher (see PRODUCT DESCRIPTION) and must be filled when the SALT REFILL indicator light in the control panel is lit. It is important to set the water hardness. It is mandatory that THE SALT RESERVOIR BE NEVER EMPTY. The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components. Start/Pause button with indicator light / Drain out FIRST TIME USE SALT, RINSE AID AND DETERGENTĪfter installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack. Sani Rinse button with indicator light / Tablet (Tab). Program number and remaining time indicator. Half Load button with indicator light / Keylock. Program selection button with indicator light. On-Off/Reset button with indicator light. #Mhe2f40rs035v whirlpool manual download#
You can download the Safety Instructions and the User Manual, by visiting our website and following the Instructions on the back of this booklet.
0 kommentar(er)
